The OneUp EDC Threadless Carrier is a threadless, no-tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube. The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt while also creating a space for the EDC Tool

• Compatible with EDC V2 Tool (You must use the small EDC V2 Storage Capsule with the Threadless Carrier)
• EDC tool sold separately
• Easy to install in less than 10 minutes. Install Instructions

Compatibility:

Most forks are compatible, except for a small number of forks with very short steerer tubes. Your fork steerer tube length must meet the minimum length requirement for the following cases.

• Fox Forks (excluding Fox 38 forks) = 190mm min
• Fox Factory/Performance Elite 38 Forks = 245mm
• RockShox Forks = 220mm min
• All other compatible forks = 190mm min

Measure from the underside of your fork crown to the top of your spacer stack or the top of your stem if you are not running any spacers above your stem.

The OneUP EDC Threadless Carrier is NOT compatible with the following forks:

• Fox E-Optimized Forks
• Fox 38 Performance/Rhythm series Forks
• RockShox 35 Forks
• Rock Shox Judy Forks
• Rock Shox eMTB Domain forks
• Giant Overdrive 2 Forks
• Cannondale Lefty Forks

The EDC Thredless Carrier is also NOT compatible with:

• Carbon Steerers
• EDC V1 tool (green multi-tool)
• EDC large Storage Capsule
• EDC CO2 cartridge carrier feature
• EDC Chain Pliers